- Product Description
- ► Shafts and Grips
- ► Club Fitting Help
- Product Reviews
Wishon 365PF Fairway Wood is the most versatile fairway wood design created. Head size and shape progresses gradually from traditional fairway wood in the #3 and 4 to slightly smaller fairway profile for the #5, to an even smaller size #7 and #9 wood.
Unlike Callaway, Taylormade, Ping, Titleist, Cobra, PXG and every other "name brand," Wishon 365PF has all these premium features:
Most accurate club head specifications in the entire golf industry...a 57° lie angle or 0° square face angle are EXACTLY those specs.
Best golf shafts (Wishon S2S) in the industry for quality and playability
Able to order a loft angle +/- 1° from standard loft angles.
Able to specify face angle and lie angle to be bent +/- 2° in any direction. This "Bendable Hosel" is NOT available on any other brand PLUS this is NOT the same as a so-called "adjustable hosel."
Extremely high moment of inertia which results in accurate ball flight.
Graduated Roll Technology - a unique vertical face design that ensures more consistent loft up and down the face. Every large golf company uses a 10" to 12" vertical roll radius up and down the club face which means the loft of the metalwoods will be as much as 3-4° lower on the bottom of the face and 3-4° higher on the top of the face. GRT face design delivers a far more consistent launch angle over the entire club face for much more consistent distance and flight for every skill level.
|Right Hand Only||Head Material: 420THC Stainless Steel|
|Hand Select Loft: +/- 1°||Face Material: 420THC Stainless Steel|
|Face Bulge: 14" to 18"|
|Lie Angle Bendable: +/- 2°||Face Roll: Graduated Roll Technology|
|Face Angle Bendable: +/- 2°||Finish: Black Paint on crown; Polished face & sole; Red trim on side skirt|
Each model of the S2S shafts are specifically designed for certain swing characteristics to help golfers of all skill levels. Each shaft is "spine aligned" plus it is measured for frequency in 7 Bend Profile Design points for a precision fit of any swing speed, swing tempo, backswing length and wrist cock release point.
For the best fitting shaft, evaluate each shaft aspect carefully. Each aspect is important so if one aspect does not fit you, look at a different shaft.
|Wrist-To-Floor Length||4' 10" - 5' 6" Tall||5' 6" - 6' 2" Tall||6' 2" - 6' 7" Tall|
|37+"||2° Upright||2° Upright||2° Upright|
|36+" - 37"||1° Upright||1° Upright||Standard|
|34+" - 36"||Standard||Standard||Standard|
|33+" - 34"||1° Flat||1° Flat||1° Flat|
|32+" - 33"||1° Flat||2° Flat||2° Flat|
|29+" - 32"||2° Flat||2° Flat||2° Flat|
|Straight shots are exactly straight. This requires no change in Club Face Angle.|
|Slight Fade means shots are still in the fairway but not in center of fairway. This requires a 1° Hook Face Bend.|
|Fade means shots normally end in rough just off the fairway. This requires a 2° Hook Face Bend.|
|Slight Draw means shots are still in fairway but not in center of fairway. This requires a 1° Slice Face Bend.|
|Draw means shots normally end in rough just of the fairway. This requires a 2° Slice Face Bend.|
|Standard: This is the standard loft of this club|
|1° Higher: This is a hand selected loft for 1° more loft than the standard loft angles which increases the trajectory of the shot.|
|1° Lower: This is a hand selected loft for 1° less loft than the standard loft angles which decreases the trajectory of the shot.|