Wishon 519SHPR Drivers

Click Images to Enlarge

$390.00

Authorized Dealer for Wishon Golf:

Yes

Normally Ships:

4 - 5 Business Days

Order This Total Quantity:

Select Loft Based on Your Average Drive Distance in Air:

Wrist Crease to Floor Measurement (Driver Length):

Your Height:

Measure Hand Length (See Grip Fitting):

Golf Skill Level (Average Score):

Average Air Distance on Drives (yards):

Backswing Length (See Shaft Fitting):

Face Angle Correction (See Club Fitting):

Desired Ball Flight (See Club Fitting):

Lie Angle (See Club Fitting):

Shaft (Before Selecting, Read Shaft Fitting Tab):

Grip (Before Selecting, Read Grip Fitting Tab):

Ask Question

()

Description
Length Fitting | Shaft Fitting
Grip Fitting

519SHPR is a new 415cc swept back head shape profile with more forward and slightly higher CG to enhance a more penetrating, lower spin flight.

In addition, it has a more solid impact sound. Available in 9° or 11° Loft angle. There is also the possibility of getting a "hand select" loft that is 1° more or less loft than the standard.

Many golfers select the wrong driver loft for their ability and strength.

It is similar to using a garden hose turned up to full power to try to get the longest distance of water spray. If you suddenly turned down the water pressure, you would see a loss of distance in the spray. In order to regain some of that distance, you raise the angle of the nozzle! Same thing is true with a golf driver. With a slower swing speed (less distance), you need a higher lofted driver which raises the trajectory to regain some of that distance.

When determining what loft angle is best, follow these suggestions:

If your drive distance in the air is 235 yds - 250 yds, select the 9° loft angle.
If your drive distance in the air is 220 yds - 235 yds, select the 11° loft angle.

Graduated Roll Technology is a 20" Roll radius on the club face that ensures that the true loft of the club face is the same no matter where it is measured.

The special stainless steel hosel allows the driver to be bent for both face angle and lie angle. Face angle can be bent 4° open (to correct for a hook) to 4° closed (to correct for a slice). The lie can be bent 4° flat to 4° upright.

Before ordering, be sure to read ALL information about Shaft Fitting, Grip Fitting and Club Fitting. For the most accurate fitting, please by very honest about your ability.

Click HERE for more info about S2S Graphite Shafts.

Right Hand Only
Head Material: 6/4 Titanium; Face Material: 6/4 Cup Face Titanium
Head Volume: 415cc
Finish: Black Oxide on entire head with Matte Black on crown

Specifications

Loft Angle	Face Angle	Std. Club Length
9°	.5° Open	44.25"
11°	0° Square	44.25"

Club Length

Measuring for Club Length Stand on flat surface and place your arms in a relaxed position by your sides. Measure from the wrist crease to the floor (as shown in the image).

Backswing Length

Backswing Length Hands Shoulder Height or Lower

Backswing Length Hands Higher Than Shoulders

Wrist Cock Release Point on Downswing

Tom Wishon shows Wrist Release on Downswing

1. Early Release: Hands uncock to begin the downswing.
2. Midway Release: Hands uncock 1/2 way.
3. Late Release: Hands uncock very near impact.

S2S Green (Wgt. 66 gram, Torque 4.5°, Softer Tip for higher launch and flight)
Backswing Length: Hands shoulder height or lower OR Hands higher than shoulders
Downswing Force: Smooth, rhythmic with little force
Wrist Cock Release Point on Downswing: Early
Average Drive Distance in the Air:
125 - 145 yards, Flexible (L)
145 - 165 yards, Senior/Lite (A)
165 - 185 yards, Regular (R)
185 - 205 yards, Firm (S)

S2S White (67g, Torque 4.0°- 3.8°) (Average Tip for slightly higher launch and higher flight)
Backswing Length: Hands shoulder height or Lower OR Hands higher than shoulders
Downswing Force: Average, with some force and energy
Wrist Cock Release Point on Downswing: Midway
Average Drive Distance in the Air:
160 - 185 yards, Senior/Lite (A)
185 - 220 yards, Regular (R)
220 - 250 yards, Firm (S)

S2S Black 65 (65g, Torque 3.6°- 3.4°) (Slightly firmer tip for mid launch and mid flight)
Backswing Length: Hands shoulder height or lower OR Hands higher than shoulders
Downswing Force: Average, with some force and energy or Fast, aggressive and forceful
Wrist Cock Release Point on Downswing: Midway to Late
Average Drive Distance in the Air:
215 - 235 yards, Regular (R)
235 - 255 yards, Firm (S)

S2S Black 85 (85g, Torque 3.4°- 3.0°) (Slightly firmer tip for mid launch and mid to slightly lower flight)
Backswing Length: Hands shoulder height or lower
Downswing Force: Fast, aggressive and forceful
Wrist Cock Release Point on Downswing: Midway to Late
Average Drive Distance in the Air:
215 - 235 yards, Regular (R)
235 - 255 yards, Firm (S)

S2S Red (Wgt. 65g, 3.4° Torque; Firm Tip for Mid to Low Launch and Flight)
Backswing Length: Hands higher than shoulders
Downswing Force: Fast, aggressive and forceful
Wrist Cock Release on Downswing: Late
Average Drive Distance in the Air:
215 - 240 yards, Regular (R)
240 - 260 yards, Firm (S)

Hand Size Measurement

Measure Hand (as shown in picture) before selecting the correct grip and size

Hand Size

Star Grip Sidewinder (Made in USA)
Qualities: Medium Feel, Tacky, Good Traction
Grip Sizes (Hand Size): Standard (7" - 7.75"), Midsize (7.75" - 8.75")

Star Grip Classic Wrap (Made in USA)
Qualities: Soft, Very Tacky
Grip Sizes (Hand Size): Standard (7" - 7.75"), Midsize (7.75" -8.75")

Wishon V-Series Classic (Made in China)
Qualities: Medium Feel, Good Traction
Grip Sizes (Hand Size): Standard (7" - 7.75"), Midsize (7.75" - 8.75") , Undersize (5.75" - 6.5")

Pure Grips Wrap
PURE Wrap (Made in USA)
Qualities: Soft, Very Tacky
Grip Sizes (Hand Size): Standard (7" - 8.25"), Midsize (8.25" - 9.25"), Oversize (9.25+")

Pure Grips DTX
PURE DTX (Made in USA)
Qualities: Firm Feel, Maximum Traction
Grip Sizes (Hand Size): Standard (7" - 8.25"), Midsize (8.25" - 9.25")

Pure Grips Pro Velvet
PURE Pro (Made in USA)
Qualities: Medium, Tacky, Good Traction
Grip Sizes (Hand Size): Undersize (6.5" - 7"), Standard (7" - 8.25"), Midsize (8.25" - 9.25")

PURE Combo Reduced Taper (Made in USA)
Qualities: Reduced Taper Grip (larger in lower hand, Firm Upper Hand, Tacky, Excellent Traction
Grip Size (Hand Size): Standard (7" - 7.75")

Lamkin Sonar Reduced Taper (Made in China)
Qualities: Soft feel, Ultra Tacky, Reduced Taper (larger in lower hand)
Grip Sizes (Hand Size): Standard (7" - 7.75"), Midsize (7.75" - 8.25")

Lamkin Crossline (Made in Mexico)
Qualities: Medium Feel, Good Traction
Grip Sizes (Hand Size): Standard (7" - 8.25"), Undersize (6.5" - 7"), Midsize (8.25" - 9.25"), Oversize (9.25+")

Golf Pride Tour Wrap (Made in Thailand)
Qualities: Soft Feel, Good Traction
Grip Sizes (Hand Size): Undersize (6.5" - 7"), Standard (7" - 8.25"), Midsize (8.25" - 9.25"), Oversize (9.25+")

CP2 Tour
Golf Pride CP2 Pro Reduced Taper (Made in Thailand)
Qualities: Medium Feel, Reduced Taper (larger in lower hand)
Grip Sizes (Hand Size): Standard (7" - 8.25"), Midsize (8.25" - 9.25")

Golf Pride Tour Velvet (Made in Thailand)
Qualities: Medium Feel, Good Traction
Grip Sizes (Hand Size): Standard (7" - 8.25"), Midsize (8.25" - 9.25"), Oversize (9.25+")

Golf Pride CP2 Wrap Reduced Taper (Made in Thailand)
Qualities: Very Soft Feel, Reduced Taper (larger in lower hand)
Grip Sizes (Hand Size): Standard (7" - 8.25"), Midsize (8.25" - 9.25")

Golf Pride MCC +4 Grip

Golf Pride MCC +4 Reduced Taper (Made in Taiwan)
Qualities: Firm Feel, Softer Feel in lower hand, Slightly Reduced Taper (larger in lower hand)
Grip Sizes (Hand Size): Standard (7" - 8.25"), Midsize (8.25" - 9.25")

Winn Dri-Tac (Made in China)
Qualities: Cushioned, comfortable feel with exceptional tacky non-slip performance
Grip Sizes (Hand Size): Undersize (6.5" - 7"), Standard (7" - 8.25"), Midsize (8.25" - 9.25"), Oversize (9.25+")