Club Description & Specs
Very Low Scoring Players (69 to 75) Only
The 585PC (Progressive Cavity) irons are the next generation of true forged carbon steel irons. As the first company to use CNC machining to create the entire back design of a forged iron with the 560MC in 2007, Wishon Golf has expanded on this with the 585PC, using a unique progressive design across the set.
585PC combine a progressive cavity back design on the #4 to 7 with a progressive muscleback design on the #8 to AW, with each iron’s back design fully created by CNC machining to achieve a precise position of the CG in each iron. The 585PC cavity back #4 to 7 iron demonstrate a progression of the major rear mass below the back cavity from lowest on the #4 iron, slightly higher with each iron to the #7 iron. This keeps the CG lower on the low loft irons to enhance launch angle and spin. The Muscleback #8 to AW present a gradual vertical rise in the mass of the muscleback to slightly raise the CG to optimize shot height as loft increases to prevent ballooning of the shot. These are the first 5-step forged from soft 1035C carbon steel before each back design is fully created by CNC machining, to reduce internal voids for superior impact feel. The U-groove scorelines of the 585PC are individually CNC machined under 2010 USGA/R&A guidelines and are fully conforming to the Rules of Golf.
| Club |
#4 |
#5 |
#6 |
#7 |
#8 |
#9 |
PW |
GW |
| Loft |
23° |
26° |
30° |
34° |
38° |
42° |
46° |
50° |
| Lie |
59.5° |
60° |
61° |
62° |
63° |
64° |
64° |
64° |
| Length |
38.5" |
38" |
37.5" |
37" |
36.5" |
36" |
36" |
35.75" |
Graphite Shaft Length: 1/2" longer
Head Material: Forged 1035 Carbon Steel
585PC Forged Irons have 2mm offset neck
Finish: Double Nickel Chrome Plating
Club Length & Grip Size
.jpg "Measure for club length") Place your arms by your sides. Measure from wrist crease to the floor. |
.jpg "Fitting Hand") Measure Hand from wrist crease to end of longest finger |
Shaft and Flex Assistance
Grip and Grip Size Assistance
Wishon V-Series Classic
Qualities: Medium Feel, Good Traction
Hand Sizes: Standard (7" - 7.75"), Midsize (7.75" - 8.75") |
Wishon 360-Series
Qualities: Excellent Traction, Maximum Feel
Hand Sizes: Standard (7" - 7.75"), Midsize (7.75" - 8.75") |
Wishon W-Series
Qualities: Tacky Feel, Maximum Traction
Hand Sizes: Standard (7" - 7.75"), Midsize (7.75" - 8.75") |
Lamkin Sonar Reduced Taper
Qualities: Soft feel, Ultra Tacky
Hand Size: Standard (7" - 7.75"), Midsize (7.75" - 8.25") |
Lamkin Crossline
Qualities: Medium Feel, Good Traction
Hand Size: Standard (7" - 8.25"), Midsize (8.25" - 9.25") |
Golf Pride Tour Wrap
Qualities: Soft Feel, Good Traction
Hand Size: Standard (7" - 8.25"), Midsize (8.25" - 9.25") |
Golf Pride Tour Velvet
Qualities: Medium Feel, Good Traction
Hand Size: Standard (7" - 8.25"), Midsize (8.25" - 9.25") |
.png "Golf Pride MCC Align +4")
Golf Pride MCC Align +4
Qualities: Firm in upper hand, Medium in lower hand
Hand Size: Standard (7" - 8.25"), Midsize (8.25" - 9.25") |
Golf Pride CP2 Pro Reduced Taper
Qualities: Medium Feel, Reduced Taper
Hand Size: Standard (7" - 8.25"), Midsize (8.25" - 9.25") |
Golf Pride CP2 Wrap Reduced Taper
Qualities: Very Soft Feel, Reduced Taper
Hand Size: Standard (7" - 8.25"), Midsize (8.25" - 9.25") |
