- ► Club Fitting
- ► Shafts / Grips
- Product Reviews
Wishon 730CL Fairway Woods consist of a 'Long Fairway Wood" and a 'High Fairway Wood.
They are two of the easiest to hit fairway woods in the golf market. Both are designed for slower swinging players (those who normally hit less than 160 yards from the tee).
The Long Fairway Wood has a 20° loft angle (similar to a 5-Wood) which gets the ball airborne very easily. The High Fairway Wood has a loft angle of 26° making it similar to a 9-Wood. This gets a very nice high, straight flight that is easy for most developing players who have trouble with long shots. They both have smaller head sizes so as not to intimidate golfers of this level.
- They are bendable for face angle and lie angle +/- 2° in any direction. This 'Bendable Hosel' is NOT available on any other brand and it is NOT the same as a so-called "adjustable hosel." Despite claims by 'name brand' golf companies that loft angle can be changed, it CANNOT.
- Extremely high moment of inertia which results in accurate ball flight.
- Graduated Roll Technology - a unique vertical face design that ensures more consistent loft up and down the face. Every large golf company uses a 10" to 12" vertical roll radius up and down the club face which means the loft of the metalwoods will be as much as 3-4° lower on the bottom of the face and 3-4° higher on the top of the face. GRT face design delivers a far more consistent launch angle over the entire club face for much more consistent distance and flight for every skill level.
|Right Hand Only||Head Material: 15-5 Stainless Steel|
|Hand Select Loft: +/- 1°||Face Bulge: 14 - 16"|
|Lie Angle Bendable: +/- 2°||Face Roll: Graduated Roll Technology|
|Face Angle Bendable: +/- 2°||Finish: Bugundy on crown; Polished face & sole; Burgundy on side skirt|
|Brand New to Golf:||No prior experience|
|New Golfer:||Just getting started with some prior experience|
|Beginner:||Working on being able to perform the basic skills with some consistency|
|Wrist-To-Floor Length||4' 10" - 5' 6" Tall||5' 6" - 6' 2" Tall||6' 2" - 6' 7" Tall|
|37+"||2° Upright||2° Upright||2° Upright|
|36+" - 37"||1° Upright||1° Upright||Standard|
|34+" - 36"||Standard||Standard||Standard|
|33+" - 34"||1° Flat||1° Flat||1° Flat|
|32+" - 33"||1° Flat||2° Flat||2° Flat|
|29+" - 32"||2° Flat||2° Flat||2° Flat|
|Straight shots are exactly straight. This requires no change in Club Face Angle.|
|Slight Fade means shots are still in the fairway but not in center of fairway. This requires a 1° Hook Face Bend.|
|Fade means shots normally end in rough just off the fairway. This requires a 2° Hook Face Bend.|
|Slight Draw means shots are still in fairway but not in center of fairway. This requires a 1° Slice Face Bend.|
|Draw means shots normally end in rough just of the fairway. This requires a 2° Slice Face Bend.|
|Standard: This is the standard loft of this club|
|1° Higher: This is a hand selected loft for 1° more loft than the standard loft angles which increases the trajectory of the shot.|
|1° Lower: This is a hand selected loft for 1° less loft than the standard loft angles which decreases the trajectory of the shot.|
Each model of the S2S shafts are specifically designed for certain swing characteristics to help golfers of all skill levels. Each shaft is "spine aligned" plus it is measured for frequency in 7 Bend Profile Design points for a precision fit of any swing speed, swing tempo, backswing length and wrist cock release point.
For the best fitting shaft, evaluate each shaft aspect carefully. Each aspect is important so if one aspect does not fit you, look at a different shaft.