Wishon 919 Fairway / Driver

Click Images to Enlarge

$299.00

Authorized Dealer for Wishon Golf:

Yes

Normally Ships:

4 - 5 Business Days

Order This Total Quantity:

Wrist Crease to Floor Measurement (Club Length):

Your Height:

Measure Hand Length (See Club Fitting):

Golf Skill Level (Average Score):

Average Air Distance on Drives (yards):

Backswing Length (See Shaft Fitting):

Face Angle Correction (See Club Fitting):

Desired Ball Flight (See Club Fitting):

Lie Angle (See Club Fitting):

Shaft (Before Selecting, Read Shaft Fitting Tab):

Grip (Before Selecting, Read Grip Fitting Tab):

Ask Question

()

Description
Length Fitting | Shaft Fitting
Grip Fitting

919 F/D is the perfect club to be used as an oversize fairway wood or as a small driver on tight driving holes. The face height and the overall club head size is between a modern normal size driver (460cc volume and 53mm in face height) and a modern 3-Wood (170cc volume and 33mm face height). The 919 F/D is 260cc volume and 39mm face height.

The head weight allows it to be built to shorter club length...43" to 43.75" plus the smaller head size has more stability and also promotes more ball speed and less spin for more distance. However, it still maintains a maximum COR face similar to a larger 460cc driver head. 919 F/D has an extremely high moment of inertia which results in accurate ball flight.

Graduated Roll Technology is a 20" Roll radius on the club face that ensures that the true loft of the club face is the same no matter where it is measured.

With a stainless steel hosel, this club is completely bendable for face angle and lie angle up to 4° in any direction. Finally, a hand select loft angle of +/- 1° is available.

Before ordering, be sure to read ALL information about Shaft Fitting, Grip Fitting and Club Fitting. For the most accurate fitting, please by very honest about your ability.

Click HERE for more info about S2S Graphite Shafts.

Head Material: 17-4 Stainless Steel on crown and sole/skirt; Face Material: HS300 high strength steel
Head Volume: 260cc
Face Roll: Graduated Roll Technology
Standard Lie Angle: 58°
Finish: Black on crown; polished face & sole; Red trim on side skirt

Specifications

Loft Angle	Face Angle	Std. Club Length
14°	0° Square	43.5"

Club Length

Measuring for Club Length Stand on flat surface and place your arms in a relaxed position by your sides. Measure from the wrist crease to the floor (as shown in the image).

Backswing Length

Backswing Length Hands Shoulder Height or Lower

Backswing Length Hands Higher Than Shoulders

Wrist Cock Release Point on Downswing

Tom Wishon shows Wrist Release on Downswing

1. Early Release: Hands uncock to begin the downswing.
2. Midway Release: Hands uncock 1/2 way.
3. Late Release: Hands uncock very near impact.

S2S Ruby (65g, Torque 5.5°, Softer Tip for higher launch and higher flight)
Backswing Length: Hands higher than shoulders
Downswing Force: Smooth, rhythmic with little force
Wrist Cock Release Point on Downswing: Early
Average Drive Distance in the Air::
0 - 150 yards, Flexible (L)

S2S Green (Wgt. 66 gram, Torque 4.5°, Softer Tip for higher launch and flight)
Backswing Length: Hands shoulder height or lower OR Hands higher than shoulders
Downswing Force: Smooth, rhythmic with little force
Wrist Cock Release Point on Downswing: Early
Average Drive Distance in the Air:
125 - 145 yards, Flexible (L)
145 - 165 yards, Senior/Lite (A)
165 - 185 yards, Regular (R)
185 - 205 yards, Firm (S)

S2S White (67g, Torque 4.0°- 3.8°) (Average Tip for slightly higher launch and higher flight)
Backswing Length: Hands shoulder height or Lower OR Hands higher than shoulders
Downswing Force: Average, with some force and energy
Wrist Cock Release Point on Downswing: Midway
Average Drive Distance in the Air:
160 - 185 yards, Senior/Lite (A)
185 - 220 yards, Regular (R)
220 - 250 yards, Firm (S)

S2S Black 65 (65g, Torque 3.6°- 3.4°) (Slightly firmer tip for mid launch and mid flight)
Backswing Length: Hands shoulder height or lower OR Hands higher than shoulders
Downswing Force: Average (some force and energy) to Fast (aggressive and forceful)
Wrist Cock Release Point on Downswing: Midway to Late
Average Drive Distance in the Air:
215 - 235 yards, Regular (R)
235 - 255 yards, Firm (S)

S2S Black 85 (85g, Torque 3.4°- 3.0°) (Slightly firmer tip for mid launch and mid to slightly lower flight)
Backswing Length: Hands shoulder height or lower
Downswing Force: Fast (aggressive and forceful)
Wrist Cock Release Point on Downswing: Midway to Late
Average Drive Distance in the Air:
215 - 235 yards, Regular (R)
235 - 255 yards, Firm (S)

S2S Red (Wgt. 65g, 3.4° Torque; Firm Tip for Mid to Low Launch and Flight)
Backswing Length: Hands higher than shoulders
Downswing Force: Fast, aggressive and forceful
Wrist Cock Release on Downswing: Late to Very Late
Average Drive Distance in the Air:
215 - 240 yards, Regular (R)
240 - 260 yards, Firm (S)

Hand Size Measurement

Measure Hand (as shown in picture) before selecting the correct grip and size

Hand Size

Star Grip Sidewinder (Made in USA)
Qualities: Medium Feel, Tacky, Good Traction
Grip Sizes (Hand Size): Standard (7" - 7.75"), Midsize (7.75" - 8.75")

Star Grip Classic Wrap (Made in USA)
Qualities: Soft, Very Tacky
Grip Sizes (Hand Size): Standard (7" - 7.75"), Midsize (7.75" -8.75")

Wishon V-Series Classic (Made in China)
Qualities: Medium Feel, Good Traction
Grip Sizes (Hand Size): Standard (7" - 7.75"), Midsize (7.75" - 8.75") , Undersize (5.75" - 6.5")

Pure Grips Wrap
PURE Wrap (Made in USA)
Qualities: Soft, Very Tacky
Grip Sizes (Hand Size): Standard (7" - 8.25"), Midsize (8.25" - 9.25"), Oversize (9.25+")

Pure Grips DTX
PURE DTX (Made in USA)
Qualities: Firm Feel, Maximum Traction
Grip Sizes (Hand Size): Standard (7" - 8.25"), Midsize (8.25" - 9.25")

Pure Grips Pro Velvet
PURE Pro (Made in USA)
Qualities: Medium, Tacky, Good Traction
Grip Sizes (Hand Size): Undersize (6.5" - 7"), Standard (7" - 8.25"), Midsize (8.25" - 9.25")

PURE Combo Reduced Taper (Made in USA)
Qualities: Reduced Taper Grip (larger in lower hand, Firm Upper Hand, Tacky, Excellent Traction
Grip Size (Hand Size): Standard (7" - 7.75")

Lamkin Sonar Reduced Taper (Made in China)
Qualities: Soft feel, Ultra Tacky, Reduced Taper (larger in lower hand)
Grip Sizes (Hand Size): Standard (7" - 7.75"), Midsize (7.75" - 8.25")

Lamkin Crossline (Made in Mexico)
Qualities: Medium Feel, Good Traction
Grip Sizes (Hand Size): Standard (7" - 8.25"), Undersize (6.5" - 7"), Midsize (8.25" - 9.25"), Oversize (9.25+")

Golf Pride Tour Wrap (Made in Thailand)
Qualities: Soft Feel, Good Traction
Grip Sizes (Hand Size): Undersize (6.5" - 7"), Standard (7" - 8.25"), Midsize (8.25" - 9.25"), Oversize (9.25+")

CP2 Tour
Golf Pride CP2 Pro Reduced Taper (Made in Thailand)
Qualities: Medium Feel, Reduced Taper (larger in lower hand)
Grip Sizes (Hand Size): Standard (7" - 8.25"), Midsize (8.25" - 9.25")

Golf Pride Tour Velvet (Made in Thailand)
Qualities: Medium Feel, Good Traction
Grip Sizes (Hand Size): Standard (7" - 8.25"), Midsize (8.25" - 9.25"), Oversize (9.25+")

Golf Pride CP2 Wrap Reduced Taper (Made in Thailand)
Qualities: Very Soft Feel, Reduced Taper (larger in lower hand)
Grip Sizes (Hand Size): Standard (7" - 8.25"), Midsize (8.25" - 9.25")

Golf Pride MCC +4 Grip

Golf Pride MCC +4 Reduced Taper (Made in Taiwan)
Qualities: Firm Feel, Softer Feel in lower hand, Slightly Reduced Taper (larger in lower hand)
Grip Sizes (Hand Size): Standard (7" - 8.25"), Midsize (8.25" - 9.25")

Winn Dri-Tac (Made in China)
Qualities: Cushioned, comfortable feel with exceptional tacky non-slip performance
Grip Sizes (Hand Size): Undersize (6.5" - 7"), Standard (7" - 8.25"), Midsize (8.25" - 9.25"), Oversize (9.25+")