919F/D is a smaller head size for use on tight tee shot holes where control and accuracy is critical
It still maintains maximum COR face design for no distance loss when compared to a larger 460cc driver head. The head weight allows it to be built to shorter club length...43" to 44" plus the smaller head size has more stability and also promotes more ball speed and less spin for more distance.
You can specify face angle and lie angle to be bent +/- 4° in any direction. This feature will produce the exact driver that fits your swing and it is NOT available on ANY other brand of club. So called "adjustable hosel" clubs want you to believe the hype about adjustable adapters, however it is not true.
Extremely high moment of inertia which results in accurate ball flight. The sound of the ball off the club face of the 919F/D is truly astounding...a very solid sound.
Graduated Roll Technology - a unique vertical face design that produces the same loft angle up and down the face. GRT face design delivers a far more consistent launch angle over the entire club face for much more consistent distance and flight for every skill level.
Features and Specifications
Head Material: 6/4 Titanium; Face Material: 6/4 Cup Face Titanium
Head Volume: 260cc
Face Roll: Graduated Roll Technology
Face Bulge: 13"
Standard Length: 43.5"
Finish: Black on crown, face & sole; Red trim on side skirt
|Loft||Lie (Bendable)||Face Angle (Bendable)|
|11° (+/- 1°)||58° (+/-4°)||0° (+/- 4°)|
|14° (+/- 1°)||58° (+/- 4°)||0° (+/- 4°)|
Face Angle Fitting
If the golfer normally hits Straight Drives, the head needs no bend adjustment
Slight Fade: Head needs a 1° hook bend adjustment
Fade: Head needs a 2° hook bend adjustment
Slice: Head needs a 3° hook bend adjustment
Severe Slice: Head needs a 4° hook bend adjustment
Slight Draw: Head needs a 1° slice bend adjustment
Draw: Head needs a 2° slice bend adjustment
Hook: Head nees a 3° slice bend adjustment
Severe Hook: Heads needs a 4° slice bend adjustment
Loft Angle Fitting
11° is best for golfers whose average drive is 230 - 260 yds.
14° is best for golfers whose average drive is 160 - 230 yds.
Ball Flight Fitting
1° Higher: Hand Selected for higher flight
1° Lower: Hand Selected for lower flight
Lie Angle Fitting
Select a lie angle (standard, flatter or upright) that comfortably fits the golfers physical stature and his address position. The center of the leading edge of the face should be touching the ground.