Most accurate club head specifications in the entire golf industry. When you order a Wishon 919THI Driver with a loft angle of 11°, it is exactly 11°. Also, you can order a hand select loft angle that is +/- 1° from the standard.
Each 919THI Driver has an extremely high moment of inertia (MOI) for maximum power, distance and accuracy.
You can specify face angle and lie angle to be bent +/- 4° in any direction. This feature will produce the exact driver that fits your swing and it is NOT available on ANY other brand of club. So called "adjustable hosel" clubs (Callaway, Taylormade, PXG, Ping, Titleist, Cobra, Mizuno) are not adjustable the same as the Wishon 919THI Driver. These large manufacturers want you to believe the hype about adjustable adapters, however it is not true.
Extremely high moment of inertia which results in accurate ball flight. But the best feature of the 919THI is the very solid sound of the ball off the club face.
Graduated Roll Technology - a unique vertical face design that produces the same loft angle up and down the face. GRT face design delivers a far more consistent launch angle over the entire club face for much more consistent distance and flight for every skill level.
Features and Specifications
Right Hand Only
Head Material: 6/4 Titanium; Face Material: 6/4 Cup Face Titanium
Head Volume: 460cc
Face Roll: Graduated Roll Technology
Face Bulge: 13"
Standard Length: 44.25"
Finish: Black on crown, face & sole; Red trim on side skirt
|Loft||Lie (Bendable)||Face Angle (Bendable)|
|9° (+/- 1°)||58° (+/- 4°)||0° (+/- 4°)|
|11° (+/- 1°)||58° (+/-4°)||.5° Closed (+/- 4°)|
|13° (+/- 1°)||58° (+/- 4°)||1° Closed (+/- 4°)|
Face Angle Fitting
If the golfer normally hits Straight Drives, the head needs no bend adjustment
Slight Fade: Head needs a 1° hook bend adjustment
Fade: Head needs a 2° hook bend adjustment
Slice: Head needs a 3° hook bend adjustment
Severe Slice: Head needs a 4° hook bend adjustment
Slight Draw: Head needs a 1° slice bend adjustment
Draw: Head needs a 2° slice bend adjustment
Hook: Head nees a 3° slice bend adjustment
Severe Hook: Heads needs a 4° slice bend adjustment
Loft Angle Fitting
9° is best for golfers whose average drive is 260 + yds.
11° is best for golfers whose average drive is 230 - 260 yds.
13° is best for golfers whose average drive is 160 - 230 yds.
Ball Flight Fitting
1° Higher: Hand Selected for higher flight
1° Lower: Hand Selected for lower flight
Lie Angle Fitting
Select a lie angle (standard, flatter or upright) that comfortably fits the golfers physical stature and his address position. The center of the leading edge of the face should be touching the ground.