Most accurate club head specifications in the entire golf industry:
Order a Wishon 919THI Driver with a loft angle of 11°, it is exactly 11°.
You can also order a hand select loft angle that is +/- 1° from the standard.
You can specify face angle (slice or hook) and lie angle (flat or upright) to be bent +/- 4° in any direction. These custom fittings will produce the exact driver that fits your swing. These are not the same as "adjustable adapters."
Extremely high moment of inertia which results in accurate ball flight. But the best feature of the 919THI is the sound of the ball off the club face...a very solid sound.
Graduated Roll Technology - a unique vertical face design that produces the same loft angle up and down the face. GRT face design delivers a far more consistent launch angle over the entire club face for much more consistent distance and flight for every skill level.
Features and Specifications
Right Hand or Left Hand
Head Material: 6/4 Titanium; Face Material: 6/4 Cup Face Titanium
Head Volume: 460cc
Face Bulge: 13"
Face Roll: Graduated Roll Technology
Standard Length: 44.25"
Finish: Black on crown, face & sole; Red trim on side skirt
|Loft||Lie (Bendable)||Face Angle (Bendable)|
|9° (+/- 1°)||58° (+/- 4°)||0° (+/- 4°)|
|11° (+/- 1°)||58° (+/- 4°)||.5° Closed (+/- 4°)|
|13° (+/- 1°)||58° (+/- 4°)||1° Closed (+/- 4°)|
|15.5° (+/- 1°)||58° (+/- 4°)||1° Closed (+/- 4°)|
Face Angle Fitting
If the golfer normally hits,
Straight Drives: Head needs no bend adjustment
Slight Fade: Head needs a 1° hook bend adjustment
Fade: Head needs a 2° hook bend adjustment
Slice: Head needs a 3° hook bend adjustment
Severe Slice: Head needs a 4° hook bend adjustment
Slight Draw: Head needs a 1° slice bend adjustment
Draw: Head needs a 2° slice bend adjustment
Hook: Head nees a 3° slice bend adjustment
Severe Hook: Heads needs a 4° slice bend adjustment
Loft Angle Fitting
9° is best for golfers whose average drive is 260 + yds.
11° is best for golfers whose average drive is 230 - 260 yds.
13° is best for golfers whose average drive is 160 - 230 yds.
15.5° is best for golfers whose average drive is 0 - 160 yds.
Ball Flight Fitting
1° Higher: Hand Selected for higher flight
1° Lower: Hand Selected for lower flight
Lie Angle Fitting
Select a lie angle (standard, flatter or upright) that comfortably fits the golfers physical stature and his address position. The center of the leading edge of the face should be touching the ground.