- Product Description
- ► Club Fitting Help
- ► Grips
- Product Reviews
Wishon 929HS Fairway Wood has a more compact head with a narrower face height, shorter face width and smaller from face to back edge of the head. It's designed for players who need help getting long fairway shots on a higher trajectory and is also good for players who play from tight, closely mowed fairways.
Unlike Callaway, Taylormade, Ping, Titleist, Cobra, PXG and every other "name brand," Wishon 929HS has all these premium features:
Most accurate club head specifications in the entire golf industry...a 57° lie angle or 0° square face angle are EXACTLY those specs.
Best golf shafts (Wishon S2S) in the industry for quality and playability
Able to order a hand select loft angle. +/- 1° loft difference from standard loft angles.
Able to specify face angle and lie angle to be bent +/- 4° in any direction. This "Bendable Hosel" is NOT available on any other brand PLUS this is NOT the same as a so-called "adjustable hosel."
Extremely high moment of inertia which results in accurate ball flight.
Graduated Roll Technology - a unique vertical face design that ensures more consistent loft up and down the face. Every large golf company uses a 10" to 12" vertical roll radius up and down the club face which means the loft of the metalwoods will be as much as 3-4° lower on the bottom of the face and 3-4° higher on the top of the face. GRT face design delivers a far more consistent launch angle over the entire club face for much more consistent distance and flight for every skill level.
|Right Hand or Left Hand||Head Material: 17-4 Stainless Steel|
|Hand Select Loft: +/- 1°||Face Material: HS300 High Strength Steel|
|Face Bulge: 13" - 16"|
|Lie Angle Bendable: +/- 4°||Face Roll: Graduated Roll Technology|
|Face Angle Bendable: +/- 4°||Finish: Black Paint on crown; Polished face & sole; Red trim on side skirt|
|Loft Angle||Lie Angle||Face Angle||Std. Length (Graphite)|
|12° #2||57.5°||0° Square||43.5"|
|14° #3||58°||0° Square||43"|
|16.5° #4||58.5°||0° Square||42.5"|
|18° #5||59°||0° Square||42"|
|21° #7||60°||0° Square||41"|
|24.5° #9||60.5°||0° Square||40"|
S2S Graphite Shafts are specifically designed for certain swing characteristics to help golfers of all skill levels. Each shaft is "spine aligned" plus it is measured for frequency in seven Bend Profile Design points for a precision fit of any swing speed, swing tempo, backswing length and wrist cock release point. This is the same type of fitting used in Tour Vans for PGA Professionals.
For the best fitting shaft, you must read this carefully and select based on the order shown below.
|Wrist-to-Floor Length||4' 10" - 5' 6" Tall||5' 6" - 6' 2" Tall||6' 2" - 6' 7" Tall|
|39+"||3° Upright||4° Upright||4° Upright|
|38+" - 39"||3° Upright||3° Upright||3° Upright|
|37+" - 38"||2° Upright||2° Upright||2° Upright|
|36+" - 37"||1° Upright||1° Upright||Standard|
|34+" - 36"||Standard||Standard||Standard|
|33+" - 34"||1° Flat||1° Flat||1° Flat|
|32+" - 33"||1° Flat||2° Flat||2° Flat|
|31+" - 32"||3° Flat||3° Flat||3° Flat|
|29+" - 31"||3° Flat||4° Flat||4° Flat|