PCF Micro Pro Description, Specifications & Club Fitting
CNC Milled Face + Micro-Groove Scorelines
Traditional sole, classic round profile shape stands as truly superb overall shape with a great looking set-up behind the ball. CNC Milled Face with Wishon's proprietary Micro-Groove™ scorelines to maximize every golfer’s ability to spin the ball.
.jpg "PCF Micro Groove Wedge Face Scoring for more Spin")
Tests with TrackMan® launch monitor verify a 1000rpm increase in spin rate compared to typical U-groove scorelines on a glass bead blast face. Wishon Golf’s proprietary Zero-Bounce heel grind ensures the leading edge of the face remains low to the ground when the face is opened for cut/finesse shots.
Conforms to 2010 USGA/R&A groove rules
PCF Micro Pro wedges are produced in a durable satin nickel/chromium electroplated finish.
Left Hand Only
Bendable loft angle: +/- 3° higher or lower
Bendable lie angle: +/- 3° upright or flat
Head Material: 304 Stainless Steel
Scorelines: Micro-Groove, U-Shape
Finish: Satin/Nickel Chrome Plated Finish
Specifications
| Loft Angle |
Lie Angle |
Std. Club Length (Steel) |
Std. Club Length (Graphite) |
| 52° GW |
64° |
35.75" |
36.25" |
| 56° SW |
64° |
35.5" |
36" |
| 60° LW |
64° |
35.5" |
36" |
Club Fitting
Club Length
.jpg "Measure for club length")
Stand on flat surface and place your arms in a relaxed position by your sides. Measure from the wrist crease to the floor (as shown in the image).
WRIST TO FLOOR MEASUREMENT FOR INITIAL CLUB LENGTHS
| Wrist to Floor Measurement |
Gap Wedge Length (Steel Shaft)
|
| 27" - 29" |
34 1/4" |
| 29" - 32" |
34 3/4" |
| 32" - 34" |
35 1/4" |
| 34" - 36" |
35 3/4" (Standard) |
| 36" - 37" |
36" |
| 37" - 38" |
36 1/4" |
| 38" - 39" |
36 1/2" |
| 39" - 40" |
36 3/4" |
| 40" - 41" |
37" |
| 41"+ |
40" |
Grip Size
.jpg)
Measure Hand (as shown in picture) before selecting the correct grip size
Shaft Flex
Backswing Length
.jpg "Hands Shoulder Height or Lower")
Hands Shoulder Height or Lower
.jpg "Hands Higher Than Shoulders")
Hands Higher Than Shoulders
Wrist Cock Release Point on Downswing
1. Early Release means the downswing to the ball is started with the hands. Generally done by beginners or higher scoring players who score 90 +.
2. Midway Release means the downswing to the ball is started with some body movement before the hands start to uncock. Generally done by Intermediate Players who score 82 - 89.
3. Late Release means the downswing to the ball is started by weight shift in the legs, followed by the trunk of the body and finally the hands uncocking very near impact with the ball. Always done by advanced players who score 70 - 79.
Lie Angle
Lie angle of your clubs is essential. It can affect shots hit with both woods and irons because it will greatly affect the initial direction of your shots. Lie angle is defined as the angle between the shaft and the ground line when the club is measured in normal playing position with the center of the sole touching the ground line.
The lie angle is much more important on irons than on woods due to club length and loft angle of the woods. It can still be of use on the woods in extreme cases.
Below is a chart the gives lie angle based on height and wrist-to-floor measurement. You can use this as a "starting point" when determining the ideal lie angle for you.
| Wrist-to-Floor Measurement |
|
| 40" |
3° Upright |
| 39" |
2° Upright |
| 38" |
2° Upright |
| 37" |
1° Upright |
| 36" |
Standard |
| 35" |
Standard |
| 34" |
Standard |
| 33" |
Standard |
| 32" |
1° Flat |
| 31" |
2° Flat |
| 30" |
3° Flat |
There is also an easy way to measure if your lie angle is correct on your irons. All you need is a Sharpie Permanent Marker. Draw a straight line on the back of the golf ball, and have it facing the clubhead. After you make impact the line will appear on the face. If it’s pointing towards the toe, then your club is too upright. If it’s pointing towards the heel, then it’s too flat. If the line is perpendicular to the grooves on the face, then your lie angle is correct.
To assist our club fitting, email a video of your swing.
1. Using your phone or tablet, have a friend video your swing. Do at least 2 swings with one facing directly at you and the other from behind looking straight down the line of flight.
2. Attach the video to an email and send HERE
3. We will analyze your swing and send our recommendations for club specifications.
